Combustion Furnace Stainless Steel Centrifugal Blower 2900rpm Belt Driven
The main features of the fan are: high fan efficiency, high total pressure, low noise, flat performance curve, wide economical use area, and the use of backward-type blades. The full-pressure efficiency of the fan at the optimum working point is 86.5% noise index ( Compared with A sound level) LS = 11.5 decibels, these two indicators are the best level compared with the current domestic industrial boilers.
| Combustion Furnace Stainless Steel Centrifugal Blower 2900rpm Belt Driven |
| Centrifugal fan | Air Flow | 3000~41000 | m3/h |
| | Pressure | 1800~5200 | Pa |
| | Rotating speed | 2900/2400/1800 | r/min |
| | Material | Carbon steel | |
| Motor | Power | 5.5~75 | kw |
| | Voltage | 220/380/440 | v |
| | Frequency | 50/60 | hz |
Wheel
The wheel shall be of the backward curved centrifugal steel type and all welded. The wheel shall be statically and dynamically balanced up to ISO 1940-G4.0 standard. Stable airflow and low sound should be ensured as the wheel is operating at the maximum allowable speed. Drop in performance shall be avoided as the operating point moves up or down. The wheel shall be readily removable for cleaning or maintenance.
High Balance Quality Grade
Each wheel has been dynamically balanced up to G4.0 standard (Just G6.3 for general products domestically and internationally).Durability, stability and quietness are guaranteed.
Optimized Design
The fan has the backward curved centrifugal wheel with its design optimized through CFD simulation and more accordant with the aerodynamic characteristics. High efficiency and more stable airflow are thus ensured.
Centrifugal fan production process:
Case Show:
FAQ
Q1: What information do you need to select the suitable fan model?
A: Air flow, total pressure or static pressure, voltage, working condition.
Q2: What is your terms of packing?
A: Standard export paper box or according to customer’s requirement.
Q3: Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q4: Do you have the products in stock?
A: Yes. there are some series products in stock.
